Let Us Show You How Your Dealership Can Get Up to $500,000 Reimbursement on Retail Warranty Parts & Labor

What Your Warranty Labor Rate Should Be, and Why It’s Likely Too Low

Your service department bills two kinds of labor every day. One is customer-pay, at your posted retail rate. The other is warranty, where the manufacturer pays for the repair instead of the customer. The work is identical. The technician, the skill, the time, the bay, the overhead, none of it changes between the two. Yet at most dealerships, the warranty labor rate is lower than the retail rate, sometimes by $40, $50, or more per hour. That difference is real money on work your technicians have already performed, and in most states you have a legal right to close it.

This is one of the most overlooked sources of gross in fixed operations, precisely because it doesn’t show up as a problem. A low warranty rate doesn’t bounce, doesn’t generate a complaint, and doesn’t flag on a monthly statement. It just quietly pays you less than you’re owed, month after month. This guide explains what a warranty labor rate actually is, why yours is almost certainly set too low, what the law entitles you to, how an increase is calculated and approved, what can go wrong in the process, and how to make sure the money ends up where it belongs, in your department.

What Is a Warranty Labor Rate?

Your warranty labor rate is the hourly rate the manufacturer reimburses you for repairs performed under its warranty. When a vehicle under warranty comes in with a covered failure, the customer pays nothing. You perform the repair, file a claim, and the manufacturer pays you for the labor and parts. The rate it pays for that labor is your warranty labor rate.

For decades, many manufacturers paid warranty labor at a flat, discounted rate that had little to do with what an individual store actually charged its retail customers. A great many dealerships are still operating on a warranty rate that was established that way years ago and has never been formally revisited. If that describes your store, the manufacturer is almost certainly reimbursing you below what your labor is worth today, and below what the law in most states requires.

How Is a Warranty Labor Rate Different From Your Retail Rate?

Your retail rate is the door rate you set and charge customer-pay jobs. You control it, and you can raise it whenever your market allows. Your warranty labor rate is different: it is not something the manufacturer simply hands you, and it is not something you can change by announcing a new number. It is established through a formal submission to the manufacturer that demonstrates, with your own documentation, what your retail labor actually costs. Until you complete that submission, the manufacturer keeps paying whatever rate is already on file, which is often a number no one at your store chose.

That is the core of the problem. The retail rate moves with your market. The warranty rate sits frozen at whatever it was last set to. Over time, the two drift apart, and the gap between them becomes money you earn but never collect.

Why Your Warranty Rate Is Probably Lower Than It Should Be

There are two reasons, and most stores have both.

The first is simple, the rate was set once, a long time ago, and nobody has touched it since. Meanwhile your parts costs rose, your technician wages rose, your retail door rate rose, and your cost of doing business rose. The warranty rate didn’t move with any of it. A rate that was fair five years ago is underwater today simply because everything around it changed and it didn’t.

The second reason is that correcting it takes a specific, documented process, and that process competes with everything else a service manager carries in a day. Pulling the right repair orders, assembling a compliant sample, and carrying the submission through the manufacturer’s review is detailed, deadline-sensitive work. It is not that dealers don’t know the money is there. It is that the drive never slows down long enough to let anyone build the submission correctly. So the rate stays where it is, and every warranty repair that leaves the shop is reimbursed at less than it should be.

On a single repair order, a low rate costs you a few dollars that are easy to overlook. Across a full year of warranty hours, it becomes one of the largest pieces of uncaptured gross in the entire department.

What Does the Law Actually Entitle You To?

Here is what many dealers never realize: you are not asking the manufacturer for a favor. In most states, dealer franchise laws require manufacturers to reimburse franchised dealers for warranty labor at the dealer’s retail rate, not a discounted one. The same principle applies to warranty parts. The manufacturer does not volunteer this, and it will not prompt you to claim it. But the law gives you the right to request it through a defined process, and once you establish a qualifying rate, the manufacturer is obligated to pay it.

For example, California Vehicle Code Section 3065 and Florida Statutes Section 320.696 both set out how manufacturers must reimburse dealers for warranty work at retail, including the method and the timelines involved. Most other states have their own versions, and the specifics vary by state and by brand. Some states define the exact calculation method. Some limit how often you may submit. Some restrict how a manufacturer may respond. But the underlying principle holds across most of the country: warranty work is owed at retail, and the gap between what you’re paid and what you’re entitled to is yours to recover.

Because the rules are state-specific and brand-specific, two stores in different states can have very different opportunities and very different submission requirements. That is one reason a generic, do-it-yourself approach so often leaves money on the table: a submission that satisfies one state’s method may not qualify under another’s.

How Is a Warranty Labor Rate Increase Calculated?

The rate is not negotiated. It is demonstrated with your own repair orders.

In most states, the method is a sample of consecutive qualifying customer-pay repair orders over a recent, defined period. Those repair orders establish what your store actually charges retail customers for labor. From that sample, an effective retail labor rate is calculated, and that figure becomes the basis for the warranty rate the manufacturer is required to pay. In other words, your own customer-pay work sets the standard the manufacturer has to meet on warranty work.

Which repair orders qualify matters enormously. Many states exclude certain categories of work from the sample, for instance, internal repair orders, discounted or coupon work, maintenance-only tickets, and other operations that would understate your true retail rate. If the sample is built with the wrong repair orders, the calculated rate comes out lower than it should, or the manufacturer rejects the submission outright. Building the sample correctly is the single most important step in the entire process.

Here is what the opportunity looks like in practice. Say your posted retail labor rate is $225 an hour, but your warranty work is being reimbursed at $175. That is a $50 gap on every warranty hour. Multiply that across the warranty hours a typical store logs in a year and the shortfall is substantial. Dealers who go through a properly built submission see an average warranty labor rate increase of $39 an hour. Combined with a parts increase, the annual impact commonly lands between $280,000 and $500,000 in recovered revenue, on work that was already performed and already counted once.

What About Warranty Parts?

Labor gets most of the attention, but parts are the other half of the opportunity, and skipping them leaves a large amount on the table. In most states, the same franchise laws that govern labor also entitle you to a retail markup on warranty parts rather than reimbursement at or near cost. Dealers who pursue parts properly commonly establish a warranty parts markup of cost plus 100%. If your warranty parts are currently being reimbursed anywhere near cost, the difference between that and a true retail markup is adding up on every claim you file.

A complete reimbursement effort addresses both labor and parts, because they are two separate submissions with two separate calculations. Capturing one and ignoring the other is one of the most common ways stores shortchange themselves. If you want a deeper look at the parts side specifically, our article on the importance of warranty reimbursement for parts and labor breaks it down.

What Can Lower or Disqualify Your Submission?

A warranty rate submission is not a form you fill out. It is an evidentiary case built from your data, and small mistakes can cost you real money. The most common issues include:

  • Building the sample from the wrong repair orders, such as including internal, discounted, or maintenance work that understates your true retail rate.
  • Pulling a sample from a period that doesn’t meet the state’s requirements for how recent or how consecutive the repair orders must be.
  • Inconsistent or incomplete documentation on the repair orders in the sample, which gives the manufacturer grounds to question the figure.
  • Submitting labor only and never pursuing the parts markup, leaving half the opportunity uncaptured.
  • Missing a state-specific requirement or filing window that changes what qualifies or how the manufacturer must respond.

Any one of these can reduce the approved rate or get the submission kicked back. Because you typically cannot re-submit immediately, a flawed first attempt can cost you a full cycle of higher reimbursement. Getting it right the first time is not a nicety. It is the difference between capturing the full increase and settling for a fraction of it.

How Long Does the Process Take?

A properly run warranty reimbursement effort moves through a defined sequence. It begins with a dealer forecast built from roughly twelve months of your data, which projects the increase you are positioned to capture. From there it moves to a dealer agreement, then to consultative development of the actual submission, then to the manufacturer’s reply, and finally to the outcome, your new, higher rate. Start to approval, the process generally runs 60 to 120 days depending on your state, your brand, and how the manufacturer responds.

That timeline is worth understanding up front, because it shapes expectations. This is not an overnight fix, and it is not a sales gimmick. It is a documented, regulated process with a beginning and an end, and once it is complete, the higher rate pays out on every warranty repair you file going forward.

How Often Should You Revisit Your Rate?

Depending on your state, a warranty reimbursement rate is an annual or semi-annual opportunity. That matters, because a rate you set two years ago may already be behind your current retail pricing. Your door rate keeps moving. If your warranty rate only gets reviewed once and then forgotten, the gap simply starts reopening the day after it’s approved.

The dealers who capture the most treat reimbursement as a recurring review tied to their current retail pricing, not a one-and-done project. Each eligible cycle is another opportunity to make sure your warranty rate still reflects what your labor and parts are actually worth.

Does Pursuing an Increase Put You at Risk With the Manufacturer?

This is the question that quietly holds a lot of dealers back, so it’s worth answering directly. Requesting the reimbursement you’re legally entitled to is a routine, lawful process that manufacturers deal with constantly. It is built into the franchise laws themselves. A correctly prepared submission asks for exactly what the statute provides, supported by your own documentation. The goal is not to push for more than you’re owed; it’s to stop accepting less. A clean, well-documented submission is both the strongest case for approval and the least likely to invite friction.

Why Most Stores Leave This Money Uncollected

It comes back to time. The service manager who owns this number is also running the drive, managing advisors, coaching technicians, and hitting monthly targets. Building a compliant submission, defending the sample, and following it through to approval is specialized work that rarely fits into a normal week. So a legitimate six-figure opportunity sits untouched, not because anyone decided to pass on it, but because no one had the hours to pursue it correctly. The money isn’t lost to a bad decision. It’s lost to a calendar.

Two Ways to Pursue a Reimbursement Increase

There are two practical paths to capturing this revenue. The first is full-service and consultative: a partner handles the entire process for you, from building the forecast to assembling the submission to carrying it through the manufacturer’s review. The second is a data-driven approach for stores that want to move faster or stay more hands-on, where the analysis is built from your data and delivered for submission. Which one fits depends on your store’s bandwidth and how involved you want to be. Either way, the work that actually determines your result, building a compliant, defensible submission from the right data, is the same.

How QB Approaches Warranty Reimbursement

We recover this revenue for you, using your own data. It starts with a free forecast: we review roughly twelve months of your numbers and show you the annualized parts and labor increase your store is positioned to capture, before you commit to anything. To do that, we coordinate with your DMS provider to pull only what’s needed. We never dial into your system.

From there, we build and submit both the labor and parts requests and work them through to the manufacturer’s response. There is no money upfront and no monthly service fee. You pay only when the manufacturer approves the increase, so our incentive is tied directly to your result. Our submissions carry a 99.6% success rate in meeting or exceeding the forecasted result, backed by more than 2,500 parts and labor submissions and over 75 years of combined warranty expertise.

That track record shows up in real stores. Greenway Automotive recovered roughly $3 million across 28 dealerships in 15 months, and Addy’s Harbor Dodge captured a $15-per-hour labor rate increase. You can see more results on our testimonials page. The outcome in every case is the same: a warranty rate that reflects what the store’s labor and parts are actually worth, paying out on every warranty repair filed afterward.

Frequently Asked Questions

Is my dealership really entitled to my retail rate on warranty work?

In most states, yes. Dealer franchise laws require manufacturers to reimburse franchised dealers for warranty labor and parts at retail, established through a defined submission. The specifics vary by state and brand, but the principle applies across most of the country.

How much can a warranty rate increase actually be worth?

It depends on your warranty volume and how far your current rate sits below retail, but dealers commonly see an average labor increase around $39 per hour plus a parts markup near cost plus 100%, with combined annual impact often landing between $280,000 and $500,000. A free forecast is the only way to know your specific number.

Will I have to pay anything up front?

With QB, no. The forecast is free, there is no upfront cost and no monthly fee, and you pay only once the manufacturer approves your increase.

Do you need access to my DMS?

No. For reimbursement, we coordinate with your DMS provider to pull only the data needed to build your submission. We never dial into your system.

How long does it take to see the higher rate?

The process generally runs 60 to 120 days from forecast to approval, depending on your state, your brand, and how the manufacturer responds. Once approved, the higher rate applies to your warranty repairs going forward.

How often can I pursue an increase?

Depending on your state, reimbursement is an annual or semi-annual opportunity. Because your retail pricing keeps moving, revisiting your rate each eligible cycle is how stores keep from falling behind again.

Is Your Warranty Rate Costing You?

If you can’t remember the last time your warranty labor rate changed, it is almost certainly too low. The work is already being done. The law in most states already entitles you to retail. The only open question is whether anyone at your store is capturing the difference.

Request your free warranty reimbursement forecast and we’ll show you exactly what your store is owed, download our reimbursement guide to see how the math works, or reach out to our team with any questions.

See what your dealership is owed on Retail Warranty Reimbursement for Parts & Labor

It's as easy as clicking the link below to get started!